JB Red Batten

High quality roofing batten and the only UK factory graded batten available to the roofing industry with BBA certification.

  • Factory graded in the UK to BS 5534
  • UKAS third party assessed by the BBA (British Board of Agrément)
  • FSC® or PEFC certified
  • Preservative treated to BS 8417: 2011 Usage Class 2 using MicroPro® against attack by wood rotting fungi and insect attack 

Description

Manufactured from slow-grown, kiln dried sideboards, JB Red sets the standard for graded roofing battens. JB Red completely meets the NHBC requirements for fully graded roofing battens. Its red colour means that it is highly visible on site, therefore Local Authority Building Control, NHBC and other inspectors can see that high quality, pre-graded and compliant battens have been used. All JB Red has full chain of custody (FSC or PEFC) certification and is available in both 25 x 38mm and 25 x 50mm sizes.

 

Function & Compatibility

JB is fully complaint with BS 5534 and provides a secure foothold in accordance with this British roofing standard.

Graded batten checklist

Not all graded batten is the same. It is important to check the quality of other battens on the market to ensure you are roofing to current British standards. The below graded batten checklist will help you decide if your current roofing batten is up to standard. With JB Red you have the peace of mind that it fully complies with BS 5534.

 

Why use JB Red?

  • Meets all the requirements of BS 5534
  • No further grading required reducing time and cost
  • Reduced risk of complaints
  • Consistent thickness and width
  • Unique red colour - easily identifiable with building control
  • Manufactured from slow grown kiln dried sideboards for maximum strength & stability
Technical

Lengths and fixing requirements

JB Red is supplied in lengths generally 3.0m and longer (usually 3.6m and longer). A batten should be a minimum of 1.2m long and span at least 3 rafters. 

Not more than one in four battens should be joined over one truss for gauges over 200mm below 200mm there can be 3 consecutive joins in any twelve battens. The best way to meet this is to buy a spread of lengths so joints can be staggered. 

Storage 

Once delivered, store battens and counter battens on sufficient bearers to prevent sagging or twisting. They should also be protected from water saturation whilst lying horizontally. 
 

We're here to help...

Read through our resources

Read all our blogs here

Related Products