Experiencing the vast variety of textures and colours that our roof tiles provide up close, can guide you in the decision making process when selecting roof coverings. Our efficient sample service can help you in this process.
Have you also considered the Edgemere interlocking slate range? With an 18mm thin leading edge, Edgemere provides an affordable upgrade to standard interlocking tiles and comes in standard, riven or duo formats, providing three distinct and slate-like finishes, for irresistible kerb appeal.
All of our concrete interlocking tiles can achieve an 'A+' rating (which has the lowest environmental impact) in the Building Research Establishment's Green Guide to Specification.
Accreditation to the BES 6001 framework standard for 'Responsible Sourcing' means that projects using our concrete interlocking slates can now achieve extra credits under BREEAM and the Home Quality Mark (HQM). Click here to find out more.
*Please note* The British Standard for Slating and Tiling (BS 5534) has recently been updated, making significant changes to tile fixing requirements. To ensure that your roof is compliant with the new standard, our fixing specification service is available and can be accessed by clicking here.
To find out more about our truly complete roof system with a 15 year warranty, please click here.
|Size of Tile||420mm x 330mm|
|Minimum Pitch||22.5° Smooth (75mm headlap)
17.5° Smooth (100mm headlap)
30° Granular (75mm headlap)
25° Granular (100mm headlap)
|Cover Width||292mm (nominal)|
|Covering Capacity||9.9 tiles /m² at 75mm headlap
10.7 tiles /m² at 100mm headlap
|Weight of Tiling||50kg/m² (0.49 Kn/m²) at 75mm headlap
54kg/m² (0.53 Kn/m²) at 100mm headlap
|Battens Required||2.9 lin.m/m² at 75mm headlap
3.1 lin.m/m² at 100mm headlap
|Batten Size Recommended||38x 25mm for rafters/supports not exceeding 450mm centres
50 x 25mm for rafters/supports not exceeding 600mm centres
|Tile Nails||50mm x 3.35mm|
|Hanging length||397mm (nominal)|
The effectiveness of the tile or slate to operate at the minimum recommended pitch and lap may be influenced by special circumstances. Guidance on pitch and lap should be obtained from the Technical Advisory Service for the following:
Nominal weight of roof tile fittings