EcoLogic epitomises forward-thinking and innovation: manufactured using roughly 50% recycled materials as a part of Marley's sustainable building solutions and improving air quality by absorbing harmful atmospheric pollutants (NOx)
EcoLogic has a unique granule finish, using surface layers of granule and cement slurry coatings combined with titanium dioxide (Ti02). This coating works as a photocatalyst stimulated by sunlight to remove both forms of nitrogen oxide (NOx) that form nitrogen dioxide (NO) and nitric oxide (NO2)These can cause respiratory problems and contribute to smog in built-up areas.
The NOx reacts with the TiO2 and sunlight to produce nitrates which are harmlessly washed from the surface of the tile by rain.
Based on the popular Ludlow Major profile, EcoLogic can achieve an A+ rating in the BRE Green Guide to Specification. In addition, compliance with the BES 6001 framework standard for Responsible Sourcing means that projects using EcoLogic can achieve extra credits under the BREEAM family of environmental assessment schemes.
|Size of Tile||420mm x 330mm|
|Minimum Pitch||30° Granular (75mm headlap)|
|Cover Width||295mm (nominal)|
|Covering Capacity||9.8 tiles /m² at 75mm headlap
10.6 tiles /m² at 100mm headlap
|Weight of Tiling||45kg/m² (0.44 Kn/m²) at 75mm headlap
49kg/m² (0.48 Kn/m²) at 100mm headlap
|Battens Required||2.9 lin.m/m² at 75mm headlap
3.1 lin.m/m² at 100mm headlap
|Batten Size Recommended||38 x 25mm for rafters/supports not exceeding 450mm centres
50 x 25mm for rafters/supports not exceeding 600mm centres
|Tile Nails||55mm x 3.35mm|
|Fixing Clips||Eaves, Verges and Tile Clips|
|Hanging length||399mm (nominal)|
The effectiveness of the tile or slate to operate at the minimum recommended pitch and lap may be influenced by special circumstances. Guidance on pitch and lap should be obtained from the Technical Advisory Service for the following:
Nominal weight of roof tile fittings
The new NBS 'Add to spec' button makes it quick and easy to add our products straight into your specifications with full details and technical properties. Just click the ‘Add to spec’ button opposite to get started.