Modern Concrete Interlocking Tile

  • Excellent covering capacity
  • Can achieve an A+ rating in the BRE Green Guide to Specification
  • Certified excellent for BES 6001
  • Interested in an affordable upgrade? Click here for more information

Tried and tested across the UK, our modern concrete tile range is available in 6 colours to provide a vast selection that won't let you down!

Experiencing the vast variety of textures and colours that our roof tiles provide up close can guide you in the decision-making process when selecting roof coverings. Our efficient sample service can help you in this process.

Request sample
Have you also considered the Edgemere interlocking slate range? With an 18mm thin leading edge, Edgemere provides an affordable upgrade to standard interlocking tiles and comes in standard, riven or duo formats, providing three distinct and slate-like finishes, for irresistible kerb appeal.


All of our concrete interlocking tiles can achieve an 'A+' rating (which has the lowest environmental impact) in the Building Research Establishment's Green Guide to Specification. 


Accreditation to the BES 6001 framework standard for 'Responsible Sourcing' means that projects using our concrete interlocking slates can now achieve extra credits under BREEAM and the Home Quality Mark (HQM). 


*Please note* The British Standard for Slating and Tiling (BS 5534) has recently been updated, making significant changes to tile fixing requirements. To ensure that your roof is compliant with the new standard, our fixing specification service is available.

This sleek, modern interlocking tile has a flat, smooth, single-lap interlocking design with a slate-like appearance enhanced by a broken bond laying pattern.

Technical specification

 Size of Tile 420mm x 330mm 
Minimum Pitch 22.5° Smooth (75mm headlap)
17.5° Smooth (100mm headlap)
30° Granular (75mm headlap)
25° Granular (100mm headlap) 
Maximum Pitch 90° 
Minimum Headlap 75mm 
Maximum Gauge 345mm
Cover Width 292mm (nominal) 
Covering Capacity 9.9 tiles /m² at 75mm headlap
10.7 tiles /m² at 100mm headlap
Weight of Tiling 50kg/m² (0.49kN/m²) at 75mm headlap 
54kg/m² (0.53kN/m²) at 100mm headlap.
Battens Required 2.9 lin.m/m² at 75mm headlap
3.1 lin.m/m² at 100mm headlap
Batten Size Recommended 38x 25mm for rafters/supports not exceeding 450mm centres
50 x 25mm for rafters/supports not exceeding 600mm centres
Tile Nails 50mm x 3.35mm
Hanging length 397mm (nominal)
Notes

The effectiveness of the tile or slate to operate at the minimum recommended pitch and lap may be influenced by special circumstances. Guidance on pitch and lap should be obtained from the Technical Advisory Service for the following:

  • Interlocking tiles and slates where the roof slope exceeds 6 metres in length and/or the site is rated to be in a severe exposure category.
  • Double-lap fibre cement slates where the roof slope exceeds 6 metres in length (severe/very severe exposure) and 9 metres in length (sheltered/moderate exposure). 

 

Nominal weight of roof tile fittings


Read through our resources

Read all of our blogs here

Other products similar to the Modern tile